Where are the wall brackets for my ML series heater?

The ML series convector heater has wall brackets provided for the 7-day timer models only. The non-timer models are not wall mountable products.

The brackets for wall mounting the heater are supplied fitted to the base of the heater. 

To wall mount the appliance, first remove the brackets as follows: 

1. Lay the heater on its back and remove the screw holding the brackets in place. The brackets can then be removed from the heater.
2. Select a suitable position on a wall, close to a suitable power socket, making sure that the minimum clearances outlined in Fig.1 are maintained. 
3. The position of the top two wall mounting brackets can be marked using the dimensions included in Fig.2 for reference. 
4. Drill and fix the top two brackets to the wall using suitable screw fixings. 
5. Locate the heater on the top brackets and allow it to hang in place. 
6. Fit the bottom bracket into the slot in the heater and then mark and fix it to the wall. 

Note: The heater should be hanging on the top brackets with the bottom bracket in position before the bottom bracket is fixed to the wall.

Applicable to models: ML2TSTie7, ML3TSTie7, ML3BTA

Require additional help? Please follow link below https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321