How much will my panel heater cost to run?

We cannot say exactly how much electricity your panel heater will use as it varies depending on which heater size is used, how it is used and how well insulated is the property. 

To give an example of a worst case cost of a heater per hour:

A PLX200E heater (rated at 2kW - 2000 watts) running continiously for one hour:

2.0kW x 1 hour running = 2kWh or 2 "units" of electricity...

If you are paying 30p per unit, (£0.30 x 2 units), that heater would have used 60 pence.

You will need to check your electricity bill to see how much you pay per unit/kWh of electricity. 

Note that this is a worst case example. In reality, the heater is unlikely to be running "flat out" all the time, as the thermostat within the heater will switch off the element once the room is up to temperature and only switching the element back on in brief bursts to maintain that room temperature. 

There are several things you can do to reduce running costs, all listed here.

Applicable to models: 

PLX050E PLX075E PLX100E PLX125E PLX150E GFP050BE GFP075BE GFP100BE GFP150BE GFP200BE

GFP050WE GFP075WE GFP100WE GFP150WE GFP200WE MFP050E MFP075E MFP100E MFP150E MFP200E

LPP050E LPP075E LPP100E LPP150E QRAD050RF QRAD075RF QRAD100RF QRAD150RF QRAD200RF

QRAD050E QRAD075E QRAD100E QRAD150E QRAD200E BPH100M BH100G CEP500E CEP750E CEP1000E CEP1500E CEP2000E CEP050E CEP075E CEP100E CEP150E CEP200E LST050E LST075E LST100E LST150E DTD2R 05, DTD2R 07, DTD2R 10, DTD2R 12, DTD4R 05, DTD4R 07, DTD4R 10, DTD4R 15, DTD4R 20