I need to replace the filter on my DXBRVAP5. How do I do this?

Applicable to models: 

DXBRVAP5

 

Issue:  

Replacement filter required.  

 

Action:

FILTER REPLACEMENT INDICATOR - A continuous red FILTER RESET light indicates that it is time to replace the filter. Replace the filter according to the directions below then press and hold the POWER button for 5 seconds to restart the program system. The FILTER RESET light will turn off. 

*The 3 in 1 filter will last approximately 6 months depending on how dirty the air is.

  1. Unplug the product. 
  2. Turn the product Upside down. 
  3. Slide the switch to unlock and remove the base. 
  4. Take out dirty filter and insert new filter into the unit. 
  5. Re-attach the base to the unit (making sure you align the internal tabs) and slide the switch to relock to secure the base.



Filters - HEPA and activated carbon filter should be cleaned once every month by vacuum cleaner. 

Note: Filters should be replaced at least once every 6 months. More frequent cleaning and replacing may be required depending on environmental conditions.



Require additional help? Please follow link below

https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article