Can I replace the UV-C lamps on the DXBRVAP5 and how do I do this?


Applicable to models:  

DXBRVAP5

 

Issue:  

UV-C lamps have failed. 

 

Action

You will need part number 500000689 (UV-C lamp), this can be purchased via UK Spares on 01454 620500. 


To replace the lamps, follow the steps below

  1. Follow the steps to remove 3 in 1 filter to obtain access to the UV-C lamp. 
  2. Remove the lamp cover screw with a small phillips screwdriver. 
  3. Carefully remove the lamp holder and unclip the attached wire. 
  4. Remove lamp from holder and replace with new lamp back in the holder. Please be gentle when removing or replacing the lamp. 
  5. Reattach lamp wire to adjoining connector and place lamp holder back in position. Carefully place the lamp cover over the lamp and twist clockwise and secure with screw. 
  6. Replace 3 in 1 filter, base and re fasten securely.

Note: Do not look into the UV-C lamp when it is ON!

 

If you are unsure on how to remove the filter, please refer to our article titled "How do I replace the filter on my DXBRVAP5?".






Require additional help? Please follow link below

https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321





Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article