How do I change the temperature on Quantum RF Storage heater?

QMRF heaters have the target temperature in the timer. The temperature can be changed on the front screen during a Heating On time, however this will revert to the target in the timer when the next Heating On time starts. If the customer wants the temperature changed permanently, they would need to do this through the timer as follows:

Press the Menu button to access the ‘Main Menu’
Turn the Dial to ‘Modes’
Press the Dial
Press the Dial to ‘Timer Modes’
Turn the Dial to select the timer you wish to amend
Press the Dial
Turn the Dial to ‘Modify’
Press the Dial to access ‘Period 1’ of the timer
Press the Dial 6 times to the temperature at the bottom of the screen
Turn the Dial to the desired target temperature
Press the Dial to ‘Period 2’
Press the Dial 5 times to the temperature
Turn the Dial to the desired target temperature for the 2^nd period
Press the Dial to ‘Period 3’
Press the Dial 5 times to the temperature
Turn the Dial to the desired target temperature for the 3^rd period
Press the Dial to ‘Period 4’
Press the Dial 5 times to the temperature
Turn the Dial to the desired target temperature for the 4^th period
Press the dial to move to the next day

Should you wish to, you can follow this process for each day. However, should you wish to have the same settings for multiple days, you can copy and paste your changes. This is done as follows:

With the Day highlighted, press and hold the Advance button for 2 seconds – the day will flash between the day and ‘Copied’
Turn the Dial clockwise to the next day
Press and hold the Dial for 2 seconds - the day will flash between the day and ‘Pasted’
Follow this process for each day you wish to have the same
Once all required days are completed, press the Back button to stop the Copy and Paste process and press Back again to Save. This will put you back to the chosen timer
If the timer has not been selected, turn the Dial to ‘Select’
Press the Dial
A Tick will appear in the middle of the screen with ‘Selected’ at the bottom

Video support:

https://vimeo.com/781515295/883f64df3a