If T_Water error is displayed on the cylinder on its own accord, then the cylinder is indicating that the hot water temperature sensor appears to be misreading.
This will require a service visit to resolve.
It is recommended that the below parts are taken:
X-B1244096 Main PCB
X-B1244575 (temp probe 10kOhm 1200mm)
This applies to the Edel 170, 200 & 270 cylinders.
Note: It is impossible to ask for the backup to run if there is a T_Water fault as the hot water cylinder cannot safely energise the immersion element, if it cannot detect the current hot water temperature.
Note if you have your Edel set as a language other than English the error may display as -
SOND E EAU (French)
T_WA SSER (German)
SOND.ACQUA (Italian)
TEMP.WODY (Polish)
T_WA TER (Dutch)
T_AGUA_ER(Spanish)
T_VODA (Slovakian, Slovene, Czech, Croatian, Serbian)
SOND T.AR (Portuguese)
VANN TEMP (Norwegian)
VIZ HOM (Hungarian)
TEMP.EUJIT (Albanian)
See help guide regarding setting of language -
Require additional help? Please follow link below
https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321
Applicable Models:
EDL170-520, EDL170-520RF, EDL200UK-630, EDL200UK-630RF, EDL270UK-630, EDL270UK-630RF
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article