How do I set the timer on my Quantum QMRF?

Video Support:

The Quantum RF storage heater is factory set to the User Timer at 21°C

The factory set times are as follows: Four modes User timer, Home all day, Out all day & Away mode.

To Modify the times please follow the below instructions:

Press the Menu button to access the ‘Main Menu’
Turn Dial to ‘Modes’
Press the Dial
Press the Dial to ‘Timer Modes’
Turn the Dial to select the timer you wish to amend
Press the Dial
Turn the Dial to ‘Modify’
Press the Dial to access ‘Period 1’ of the timer
Press the Dial twice to the ‘ON’ hour for ‘Period 1’
Turn the Dial to the hour you wish the heat to start at
Press the Dial to the ‘ON’ minutes
Turn the Dial to the minute you wish to start at
Press the Dial to the ‘OFF’ hour
Turn the Dial to the hour you want the first heating period to stop
Press the Dial to the ‘OFF’ minutes
Turn the Dial to the minute you want the heat to stop
Press the Dial to temperature
Turn the Dial to select your target room temperature. This is factory set to 21°C
Press the Dial – This will move the timer to ‘Period 2’
Press the Dial again for the 2^nd heating period’s ‘ON’ hour
Turn the Dial to select the hour you want the 2^nd heating period to start
Press the Dial to the ‘ON’ Minutes
Turn the Dial to select the minutes you want the 2^nd heating period to start
Press the Dial to the ‘OFF’ hour
Turn the Dial to select the hour you want the 2^nd heating period to end
Press the Dial to the ‘OFF’ Minutes
Turn the Dial to select the minute you want the 2^nd heating period to end
Press the Dial to temperature
Turn the Dial to select your target room temperature for the 2^nd heating period. This is factory set to 21°C
Press the Dial – This will move the timer to ‘Period 3’
Press the Dial again for the 3^rd heating period’s ‘ON’ hour
Turn the Dial to select the hour you want the 3^rd heating period to start
Press the Dial to the ‘ON’ Minutes
Turn the Dial to select the minutes you want the 3^rd heating period to start
Press the Dial to the ‘OFF’ hour
Turn the Dial to select the hour you want the 3^rd heating period to end
Press the Dial to the ‘OFF’ Minutes
Turn the Dial to select the minute you want the 3^rd heating period to end
Press the Dial to temperature
Turn the Dial to select your target room temperature for the 3^rd heating period. This is factory set to 21°C
Press the Dial – This will move the timer to Period 4
Press the Dial again for the 4^th heating period’s ‘ON’ hour
Turn the Dial to select the hour you want the 4^th heating period to start
Press the Dial to the ‘ON’ Minutes
Turn the Dial to select the minutes you want the 4^th heating period to start
Press the Dial to the ‘OFF’ hour
Turn the Dial to select the hour you want the 4^th heating period to end
Press the Dial to the ‘OFF’ Minutes
Turn the Dial to select the minute you want the 4^th heating period to end
Press the Dial to temperature
Turn the Dial to select your target room temperature for the 4^th heating period. This is factory set to 21°C
Press the Dial to move to the next Day and the day will be highlighted

Should you wish to, you can follow this process for each day. However, should you wish to have the same settings for multiple days, you can copy and paste your changes. This is done as follows:

With the Day highlighted, press and hold the Advance button for 2 seconds – the day will flash between the day and ‘Copied’
Turn the Dial clockwise to the next day
Press and hold the Dial for 2 seconds - the day will flash between the day and ‘Pasted’
Follow this process for each day you wish to have the same
Once all required days are completed, press the Back button to stop the Copy and Paste process and press Back again to Save. This will put you back to the chosen timer’s menu
If the chosen timer has not been selected, turn the Dial to ‘Select’
Press the Dial
A Tick will appear in the middle of the screen with ‘Selected’ at the bottom

Applicable to models: QM050RF QM070RF QM100RF QM125RF QM150RF

Keywords: Programme modes, set programme, programme settings